MARINE PREMIUM PLUS OUTBOARD TWO-CYCLE OIL

PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWO-CYCLE OIL

PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWO-CYCLE OIL is a premium “Synthetic Blend” certified by the National Marine Manufacturer’s Association (NMMA) as an approved NMMA TC-W3® lubricant and is specifically designed for exceptional performance in marine applications.
PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWO-CYCLE OIL is a synthetic blend product formulated with a higher additive concentration than required for NMMA TC-W3® certification. This extra level of performance protects outboard engines under the most severe operating conditions.
PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWO-CYCLE OIL contains only ashless components which helps prevent any lubricant related preignition and spark plug fouling. The ashless additives also help protect against piston and combustion chamber deposits, rust, and corrosion. It’s “anti-gel” properties help resist gel formation due to water or other contamination. The special base stocks used resist piston and cylinder wall scuffing.

APPLICATIONS
  • PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWOCYCLE OIL mixes easily with gasoline, and is dyed blue to allow for easy detection.Follow engine manufacturer’s recommended fuel/oil ratio for premix systems. It is also recommeded for oil injection systems.
  • PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWOCYCLE OIL may also be used in other applications calling for NMMA TC-W®, TC-WII®, or TC-W3® approved oils.
PERFORMANCE FEATURS AND BENEFITS
  • Synthetic blend for high performance applications
  • Maximum additive treatment, including increased detergency over the TC-W3® formulation. Helps protects engines against failures due to scuffing, ring sticking, port deposits, bearing failures and plug fouling.
  • Exceeds NFPA Code 30 Class IIIB liquids flash point limits. Flash point exceeds 2000F and requires no special warehousing.
  • NMMA TC-W3® certified. Exceeds warranty requirements for all outboard engine manufacturers
  • Mixes easily with fuel for premix applications
  • Excellent flow properties for oil injection systems
SPECIFICATIONS, APPROVALS & RECOMMENDATIONS

PETRO-ONE MARINE PREMIUM PLUS OUTBOARD TWOCYCLE OIL exceeds the requirements of the NMMA TCW3® standard. It is recommended for and meets the warranty requirements of outboard engines produced by the following manufacturers:

  • Evinrude
  • Johnson
  • Mercury
  • Mariner
  • U.S Marine/Force
  • Sears
  • Suzuki
  • Yamaha
TYPICAL PHYSICAL CHARACTERISTICS

Properties

Method

PETRO-ONE MARINE Premium Plus Outboard 2-Cycle

Gravity API

ASTM D4052

29.8

Pounds per Gallon

ASTM D4052

7.31

Flash Point 0C(0F)

ASTM D93

97(207)

Kinematic Viscosity @400C cSt

ASTM D445

59

Kienematic Viscosity @1000C cSt

ASTM D445

9.37

Viscosity Index

ASTM D2270

133

Brookfield Viscosity @-250C cP

ASTM D2983

6300

Pour Point 0C(0F)

ASTM D97

-43(-45)

Material Number Bulk

 

3843